Corn Export Cargo Quality Report 2015/2016

II. INTRODUCTION

Corn quality information is important to foreign buyers and other industry stakeholders as they make decisions about purchase contracts and processing needs for corn for feed, food or industrial use. The U.S. Grains Council 2015/2016 Corn Export Cargo Quality Report provides accurate, unbiased information about the quality of U.S. yellow commodity corn as it is assembled for export early in the marketing year. This report provides test results for corn samples collected during the U.S. government-licensed sampling and inspection process for U.S. corn waterborne and rail export shipments.

This Export Cargo Report is based on 408 yellow commodity corn samples collected from corn export shipments as they underwent the federal inspection and grading process performed by the U.S. Department of Agriculture’s (USDA) Federal Grain Inspection Service (FGIS) or licensed inspectors at interior offices. The sample test results are reported at the U.S. aggregate level (U.S. Aggregate) and by export points associated with three general groupings, which are labeled Export Catchment Areas (ECAs). These three ECAs are identified by the three major pathways to export markets:

  1. The Gulf ECA consists of areas that typically export corn through U.S. Gulf ports;
  2. The Pacific Northwest ECA includes areas that usually export corn through Pacific Northwest and California ports; and
  3. The Southern Rail ECA comprises areas generally exporting corn to Mexico by rail from inland subterminals.

The sample test results are also summarized by “contract grade” categories (“U.S. No. 2 or better” and “U.S. No. 3 or better”) to illustrate the practical quality differences between these two contract specifications. This report provides detailed information on each of the quality factors tested, including average, standard deviation and distribution for the aggregate of all samples and for each of the three ECAs. The “Quality Test Results” section summarizes the following quality factors:

  • Grade Factors: test weight, broken corn and foreign material (BCFM), total damage, and heat damage
  • Moisture
  • Chemical Composition: protein, starch, and oil
  • Physical Factors: stress cracks, stress crack index, 100-kernel weight, kernel volume, kernel true density, whole kernels, and horneous (hard) endosperm
  • Mycotoxins: aflatoxins and DON Details about the testing analysis methods used for this report are provided in the “Testing Analysis Methods” section.

New to this 2015/2016 Export Cargo Report is a simple average of the quality factors’ averages and standard deviations of the previous four Export Cargo Reports (2011/2012, 2012/2013, 2013/2014, and 2014/2015). These simple averages are calculated for the U.S. Aggregate and each of the three ECAs, and are referred to as “4YA” in the report.

For the 2015/2016 Export Cargo Report, FGIS and interior offices collected samples during November 2015 through mid-March 2016 to generate statistically valid results for the U.S. Aggregate and by ECA. The objective was to obtain enough samples to estimate quality factor averages of the corn exports with a relative margin of error (Relative ME) less than ± 10%, a reasonable target for biological data such as these factors. Details of the statistical sampling and analysis methods are presented in the “Survey and Statistical Analysis Methods” section.

This 2015/2016 Export Cargo Report is the fifth in a series of annual surveys of the quality of the U.S. corn exports early in the marketing year. In addition to the Council reporting the quality of corn exports early in the current marketing year, the cumulative Export Cargo Report surveys will provide increasing value to stakeholders. The five years of data enable export buyers and other stakeholders to begin making year-to-year comparisons and assessing patterns in corn quality based on growing, drying, handling, storage and transport conditions.

The Export Cargo Report does not predict the actual quality of any cargo or lot of corn after loading or at destination, and it is important for all players in the value chain to understand their own contract needs and obligations. Many of the quality attributes, in addition to grade, can be specified in the buyer-seller contract. In addition, this report does not explain the reasons for changes in quality factors from the Harvest Report to the Export Cargo Report. Many factors, including weather, genetics, commingling, and grain drying and handling, affect changes in quality in complex ways. Sample test results can vary significantly depending on the origination of the corn, the ways in which a corn lot was loaded onto a conveyance, and the method of sampling used.

A companion report, the U.S. Grains Council 2015/2016 Corn Harvest Quality Report, was released in December 2015 and reported on the quality of the corn as it entered the U.S. marketing system. The 2015/2016 Harvest Report and the 2015/2016 Export Cargo Report should be studied together so that changes in corn quality occuring between harvest and export can be understood. A review of how corn quality evolves from the field to the ocean vessel or railcar is provided in the “U.S. Corn Export System” section.