Home

Corn Export Cargo Quality Report 2015/2016

Contents

  1. Export Cargo Quality Highlights
  2. Introduction
  3. Quality Test Results
  4. Moisture
  5. Chemical Composition
  6. Physical Factors
  7. Mycotoxins
  8. U.S. Corn Export System
  9. U.S. Corn Export Flow
  10. Impact of the Corn Market Channel on Quality
  11. U.S. Government Inspection and Grading
  12. Survey and Statistical Analysis Methods
  13. Survey Design and Sampling
  14. Statistical Analysis
  15. Testing Analysis Methods
  16. Corn Grading Factors
  17. Moisture
  18. Chemical Composition
  19. Physical Factors
  20. Mycotoxin Testing
  21. U.S. Corn Grades and Conversions
Download report

A. Corn Grading Factors

1. Test Weight

Test weight is the weight of the volume of grain that is required to fill a Winchester bushel (2,150.42 cubic inches) to capacity. Test weight is a part of the FGIS Official United States Standards for Grain grading criteria.

The test involves filling a test cup of known volume through a funnel held at a specific height above the test cup to the point where grain begins to pour over the sides of the test cup. A strike-off stick is used to level the grain in the test cup, and the grain remaining in the cup is weighed. The weight is then converted to and reported in the traditional U.S. unit, pounds per bushel (lb/bu).

2. Broken Corn and Foreign Material (BCFM)

Broken corn and foreign material (BCFM) is part of the FGIS Official United States Standards for Grain grading criteria.

The BCFM test determines the amount of all matter that passes through a 12/64th inch round-hole sieve and all matter other than corn that remains on the top of the sieve. The sample for the BCFM measurement is separated into broken corn and foreign material. Broken corn is defined as all material passing through a 12/64th inch roundhole sieve and retained on a 6/64th inch round-hole sieve and typically accounts for the majority of total BCFM. Foreign material is defined as all material passing through a 6/64th inch round-hole sieve and the coarse non-corn material retained on the 12/64th inch round-hole sieve. While FGIS can report broken corn and foreign material separately if requested, BCFM is the default measurement and thus is provided for the Export Cargo Report. BCFM is reported as a percentage of the initial sample by weight.

3. Total Damage/Heat Damage

Total damage is part of the FGIS Official United States Standards for Grain grading criteria.

A representative working sample of 250 grams of BCFM-free corn is visually examined by a trained and licensed inspector for content of damaged kernels. Types of damage include blue-eye mold, cob rot, dryer-damaged kernels (different from heat-damaged kernels), germ-damaged kernels, heat-damaged kernels, insect-bored kernels, molddamaged kernels, mold-like substance, silk-cut kernels, surface mold (blight), surface mold, mold (pink Epicoccum) and sprout-damaged kernels. Total damage is reported as the weight percentage of the working sample that is total damaged grain.

Heat damage is a subset of total damage and consists of kernels and pieces of corn kernels that are materially discolored and damaged by heat. Heat-damaged kernels are determined by a trained and licensed inspector visually inspecting a 250-gram sample of BCFM-free corn. Heat damage, if found, is reported separately from total damage.